amp Inc’s 2.5” SATA III SSD (Solid State Drive) is a high performance and high reliability storage device based on NAND Flash technology that is designed to solve the “bottlenecking” of computing system by traditional hard disk drives. With zero moving parts, the 2.5” SATA III SSD has same host interface and physical dimensions as a hard disk drive. With high performance and low power consumption, amp Inc’s 2.5” SATA III SSD can store a large amount of data for many different operating systems without the large footprint and weight.
amp Inc’s 2.5” SATA III SSD provides protection against shock and vibration that are common in extreme environments. amp Inc’s 2.5” SATA III SSD also contains a highly advanced flash memory management algorithm system to guarantee higher performance and data integrity.
MLC
* C = Commercial Temperature | SLC
|
| FORM FACTOR | |||
|---|---|---|---|
| 2.5” (100.00 X 69.85 X 9.50) mm | |||
| CAPACITY | |||
| 32GB to 640GB | |||
| HOST INTERFACE | |||
| Serial ATA interface of 6 Gbps | |||
| PERFORMANCE | |||
| ATA‐8 standard compliant including ATA8‐ACS2 Sequential Data Read/Write (max): 520/500MB/s* Flash management algorithm: static and dynamic wearleveling, bad block management algorithm Supports dynamic power management and SMART (Self‐Monitoring, Analysis and Reporting Technology) ECC (Error Correction Code): 64 bit BCH ECC per 1KByte Write endurance: >8 years @ 100GB write/ day Read endurance: unlimited Data retention: 10 years MTBF: 2,000,000 Hours MLC‐SLC NAND Secure Erase Hardware Erase Write Protect AES256 and AES128 | |||
| POWER CONSUMPTION | |||
| Input voltage: +5VDC, ±5% | |||
| ENVIRONMENTAL TEMPERATURE | |||
| Operating: 0°C ∼ 70°C (Commercial) ‐40°C ~ 85°C (Industrial) | |||
| SHOCK | |||
| Operating: 1500G, duration 11ms, Half Sine Wave Non‐Operating: 1500G, duration 0.5ms, Half Sine Wave | |||
| VIBRATION | |||
| 20G Peak, 10~2000Hz,(15mins/Axis) x3 Axis | |||
| RoHS | |||
| RoHS Compliant (Lead Free) |