Mon - Fri: 8:00 - 17:00 PST
Home » Products » M.2 PCIe NVMe

M.2 PCIe NVMe

Find and purchase these parts online. Click the part numbers below.

AMP E14 SERIES PCIE GEN4 X4 3D TLC

AMP, Inc.’s E14 Series SSD provides you the ultimate performance and ultra-high reliability over traditional hard disk drives by achieving up to 3,500MB/s for sequential read, 3,000MB/s for sequential write, 500,000 IOPS for random read, and 55,000 IOPS for steady state random write.

Key product highlights include:

  • High I/O and throughput performance
  • Next generation LDPC technology secures NAND endurance
  • Advanced flash management and global wear leveling algorithm extending drive life
  • High stability and reliability
  • Temperature monitoring and intelligent management
M.2 2230 (30mm)

M.2 2242 (42mm)

M.2 2280 (80mm)

* C = Commercial Temperature
* I = Industrial Temperature

M.2 2280 PCIe, NVMe Gen 4×4 T7i

AMP Inc.’s M.2 2280 delivers all the advantages of flash disk technology with PCIe Gen4 x4 interface and is fully compliant with the standard Next Generation Form Factor (NGFF) called M.2 Card Format. AMP Inc.’s M.2 2280 offers a wide range capacity up to 4TB and its performance can reach up to 7000 MB/s(for read) and 6850 MB/s(for write) based on Micron B27B TLC NAND flash with the choice of 512MB/1GB/2GB DDR42. Moreover, the power consumption of M.2 2280 is much lower than traditional hard drives, making it the best embedded solution for new platforms.

AMP M.2 2280 PCIe Gen3 x4 3D TLC FIPS 140-2

AMP, Inc.’s M.2 2280 FIPS PCIe solid state drive delivers all the advantages of flash disk technology with PCIe Gen3 x4 interface and is fully compliant with the standard Next Generation Form Factor (NGFF) called M.2 Card Format. The M.2 2280 provides a wide range capacity up to 2TB and its performance can reach up to 3,400 MB/s read and 3,100 MB/s write based on 3D TLC NAND flash with the choice of 512MB/1GB/2GB DDR4. Moreover, the power consumption of the M.2 2280 is much lower than traditional hard drives, making it the best embedded solution for new platforms.

AMP M.2 2280 PCIe Gen3 x4 BiCS3 TLC SSD

AMP, Inc.’s M.2 2280 PCIe solid state drive delivers all the advantages of flash disk technology with PCIe Gen3 x4 interface and is fully compliant with the standard Next Generation Form Factor (NGFF) called M.2 Card Format. The M.2 2280 provides a wide range capacity up to 1920GB and its performance can reach up to 3,000 MB/s read and 1,000MB/s write based on Toshiba’s BiCS3 TLC NAND flash with the choice of 512MB/1GB/2GB DDR3L/DDR4. Moreover, the power consumption of the M.2 2280 is much lower than traditional hard drives, making it the best embedded solution for new platforms.

* C = Commercial Temperature
* I = Industrial Temperature

M.2 2280 PCIe, NVMe Gen 3×4

AMP Inc’s M.2 2280 delivers all the advantages of memory module technology with PCIe Gen3 x 4 interface and is fully compliant with the standard Next Generation Form Factor (NGFF) called M.2 Card Format, which is generated by Intel. M.2 2280 could provide a wide range capacity up to 480GB and reach up to 2,750 MB/s read as well as 1,200MB/s write high performance based on Toshiba ’s 15nm Toggle MLC flash (with 256MB/512MB DDR3L cache enabled and measured by Crystal Disk Mark v3.0). Moreover, the power consumption of the M.2 2280 is much lower than traditional hard drives, making it the best embedded solution for new platforms.

AMP M.2 2280 PCIe Gen3 x2 3D TLC

AMP, Inc.’s M.2 2280 is an NVM Express DRAM-less SSD designed as the standard M.2 form factor with PCIe interface and industrial 3D TLC NAND Flash. The M.2 2280 supports PCIe Gen3 x2, and is compliant with NVM 1.3 providing excellent performance. With sophisticated error detection and correction (ECC) functions, the module can ensure full end-to-end data path protection that secures the data transmission between host system and NAND Flash.

AMP, Inc.’s M.2 2280 is integrated with Marvell controller which provides both low power consumption and efficient heat dissipation, making the SSD optimal for space-constrained IPCs and server boot-up applications.

* C = Commercial Temperature
* I = Industrial Temperature

M.2 2280 PCIe NVMe Gen 2 MLC Industrial SSD

AMP Inc.’s M.2 2280 NVMe 1.1 solid state drive delivers all the advantages of flash disk technology with PCIe Gen2x4 interface. The M.2 2280 could provide a wide range capacity up to 2000GB and its performance can reach up to 1000MB/s read and 800MB/s write based on 3D MLC NAND and 2D MLC NAND flash. Moreover, the power consumption of the M.2 2280 is much lower than traditional hard drives, making it the best embedded solution for new platforms.