Mon - Fri: 8:00 - 17:00 PST
Home » Products » M.2 SATA

M.2 SATA

Find and purchase these parts online. Click the part numbers below.

M.2 2242 SATA MLC (42mm)

AMP, Inc.’s M.2 2242 delivers all the advantages of flash disk technology with the Serial ATA I/II/III interface and is fully compliant with the standard Next Generation Form Factor (NGFF) called M.2 Card Format, which is generated by Intel. The M.2 2242 SSD is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 256GB. Moreover, it can reach up to 500MB/s read as well as 200MB/s write high performance based on Toggle 2.0 MLC flash (with 32MB SDR enabled and measured by CrystalDiskMark v3.0). The power consumption of the M.2 2242 is much lower than traditional hard drives, making it the best embedded solution for new plat forms.

M.2 2280 SATA (80mm)

AMP Inc.’s M.2 2280 SSD delivers all the advantages of flash disk technology with SATA (6Gbps) or SATA I/II/III interface. It is fully compliant with the standard Next Generation Form Factor (NGFF) called M.2 Card Format and can provide a wide range capacity up to 2000GB. Its performance can reach up to 550MB/s read and 500MB/s write based on 2D MLC, 3D MLC, Toggle 2.0 MLC, 16CE and Toggle3.0/4.0 TLC/QLC flash. The M.2 2280 is designed to operate at a maximum operating frequency of 300MHz or 200MHz with 30MHz external crystal. It features L3 architecture with the latest SATA III (6.0GHz) Marvell NAND controller and supports several standard features, including TRIM, NCQ, and S.M.A.R.T. Additionally, AMP, Inc.’s exclusive industrial-oriented firmware provides a flexible customization service, making it the best embedded solution for new platforms.

MLC

TLC

* C = Commercial Temperature
* I = Industrial Temperature