Archives

<p>flat rate for SD</p>

DDR4 32GB 3200Mbps RDIMM 1R 4Gx4 by SAMSUNG

Samsung’s solid state storage memory modules are designed for a wide range of applications to deliver the best performance with low power requirements. Features a Data Bus Inversion (DBI) to minimize I/O switching current, CRC (Cyclic Redundancy Code) for enhanced data reliability and more.
Read More

DDR4 2400 ECC DIMM 16GB

AMP inc’s 288 pin DIMM using (18) x8 bit DDR4 SDRAM organized as 72-bit wide. This DDR4 DIMM is intended for use as main memory in systems such as server and workstation computers. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high-performance memory system applications. With the sodimm ddr4 16gb's operating voltage, 1.2V, the amp inc’s DDR4 DIMMs are ideal for servers and desktop computers. Main fe...
Read More

DDR4 2666 Registered ECC DIMM 8GB

AMP inc’s 288 pin Registered DIMM using (9) x8 bit DDR4 SDRAM organized as 72-bit wide. This DDR4 DIMM is intended for use as main memory in systems such as server and workstation computers. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high performance memory system applications. With this ddr4 sodimm's operating voltage, 1.2V, the amp inc’s DDR4 Registered DIMMs are ideal for servers and desktop c...
Read More

DDR4 2666Mbps RDIMM 32GB

AMP inc’s 288 pin DIMM using (18) x8 bit DDR4 SDRAM organized as 72-bit wide. This DDR4 DIMM is intended for use as main memory in systems such as server and workstation computers. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high performance memory system applications. With this ddr4 dimm's operating voltage, 1.2V, the amp inc’s DDR4 DIMMs are ideal for servers and desktop computers. Main features...
Read More

2.5” Solid State Drive, SATA III, 3D MLC, Industrial temperature 20TB

AMP Inc.’s Prime series solid state external hard drive delivers solid I/O cost-to-performance benefits for applications that demand low latency read speeds and greater bandwidth for server and storage environments for Serial Advanced Technology Attachment (SATA)-based systems in capacities of 20TB.  The Prime series uses a single-chip controller with a SATA interface on the system side and 8-channels of NAND Flash internally. The industry-standard 2.5-inch form factor enables intercha...
Read More

3.0 MLC Enhanced and Industrial Temperature SD Card

The Secure Digital (SD) card version 3.0 is fully compliant with the specification released by SD Card Association. The Command List supports [Part 1 Physical Layer Specification Ver3.01 Final] definitions. Card capacities of non-secure area and secure area support [Part 3 Security Specification Ver3.0 Final] Specifications. The SD 3.0 card is based on 9-pin interface, designed to operate at a maximum operating frequency of 100MHz. It can alternate communication protocol between the SD mode and ...
Read More

3.0 MLC Enhanced Temperature SDXC Card

The Accelerated Memory Production, Inc. Industrial Grade Secure Digital MLC storage card low power consumption and extended endurance are ideal for both Linux-based and Windows-based embedded systems. It is fully compliance with the specifications released by SD Card Association. This industrial SD 3.0 card comes with 9-pin interface, designed to operate at a maximum operating frequency of 208MHz. * Optional pSLC mode offers improved performance and extended endurance of 20,000 program/erase cyc...
Read More

4.0 pSLC MicroSD SDXC Card

MicroSD
MicroSDXC 4.0 cards’ low power consumption and extended endurance are ideal for both Linux-based and Windows-based high performance embedded devices. It is fully compliance with the specifications released by SD Card Association. This industrial MicroSD 4.0 card comes with 16-pin interface, designed to operate at a maximum operating throughput (logical/ideal case) of 312MB/s. It is downward compatible to work with SD3.0 and UHS-1/Class 10 interface. The pSLC mode further improves performance and...
Read More

3.0 pSLC MicroSD Card

MicroSD
microSD is a kind of new industrial microSD card based on semiconductor Flash Memory technology. It has very large memory capacities, high speed data transmission rate, great flexibility, and excellent security. It does not need extra power to maintain the memorized information. It is a unified solid dielectric, and it does not have any movable parts, so there is no need to worry about the damage of mechanical motion. An extended industrial operating temperature range of -25°C to +85° is also av...
Read More