SATAbus mSATA 50mm SATA II SSD (Solid State Drive)

amp inc’s mSATA 50mm SATA II SSD (Solid State Drive) is a high performance, high reliability storage device based on NAND Flash technology that is designed to solve “bottlenecking” of a computing system caused by traditional hard disk drives. With zero moving parts, the SATAbus has the same host interface and physical dimensions as a hard disk drive. With high performance and low power consumption, amp inc’s mSATA 50mm can store a huge amount of data for many different operating systems.

mSATA 50mm SATA II SSD provides protection against shock and vibration that are common in extreme environments. Our mSATA 50mm also contains a highly advanced flash memory management algorithm system to guarantee higher performance and data integrity.

50mm mSATA MLC

SLC

FEATURES
. SATA: External Transfer Rate (Host Transfer Rate): 300MB/s
. ATA-7 standard compliant (partially compliant with ATA-s)
. Sequential Data Read/Write(avg.): 100/60MB/s
. Form factor: mSATA (50.65 x 30.0 x 3.80)mm
. Input voltage: +3.3VDC, ±5%
. Operating temperature range
  Commercial: 0°C to 70°C, Industrial: -40°C to +85°C
. Flash management algorithm: static and dynamic wear-leveling, bad block management algorithm
. Supports dynamic power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
. ECC (Error Correction Code): 40 bit BCH ECC per 1KByte
. Write endurance: >8 years @ 100GB write/ day
. Read endurance: unlimited
. Data retention: 10 years
. MTBF: 1,000,000 Hours
. MLC NAND
CAPACITY
8GB-128GB