1.8″ PATA SSD (Solid State Drive), H1-Series

1.8 inch PATA SSDamp inc’s 1.8″ PATA SSD (Solid State Drive) is a high performance and high reliability storage device based on NAND Flash technology that designed to solve the bottleneck of computing system by traditional hard disk drives. amp inc’s 1.8″ PATA SSD doesn’t have a moving parts and it has a same host interface and same physical dimension with Hard Disk Drive, so it can be drop-in replaced with the hard disk drives without anything. With a high performance and low power consumption, amp inc’s 1.8″ PATA SSD can be a good storage device for NB and Tabletop PC.

amp inc’s 1.8″ PATA SSD purely consists of semiconductor devices and NAND flash memories, which give rugged features against shock and vibration, use in extreme environment such as industrial PC an increased MTBF. Furthermore, amp inc’s 1.8″ PATA SSD has highly advanced flash memory management algorithm to guarantee higher performance and data integrity.

MLC

SLC

Specification Summary

Based spec Interface IDE 50Pin
Dimension 54.0 x 74.5 x 5.0 mm
Weight 1 62˜72 g
Capacity 8GB˜256GB
Flash type MLC/SLC NAND
Read/Write Performance Data Transfer Rate to Flash Memories Up to 80 MB/s (max)
4KB Random Write IOPS 300
Response Time 0.2ms
Power Consumption Power Supply 3.3V ± 5%
Idle 0.56W
4KB Write 0.87W
Reliability Write endurance: 8 years@ 100G write/day(32G)
Read endurance: unlimited
MTBF: >2,000,000 hours
Date retention: >10years@ 25°C
Sudden power-off recovery support
ECC: 6,8 or 24bits for 512Bytes
S.M.A.R.T and dynamic power management support
Bad block management algorithm
Environment Storage temperature: -55˜95°C
Operation temperature: Optional
Humidity: 5%˜95%
Vibration: 20G Peak, 10~2000Hz, (15mins/ Axis) x3 Axis
Shock: 1500G (@0.5ms half sine wave)
Warranty 3 years